HURLIMANN 445 STD PRINCE
Models
| Models | te7 |
|---|---|
| Horsepower | < 60 |
INCLUDES
- Coupling
- Arms
- Hydraulic installation (Electrovalve, Manifold and Tractor Controls)
- All operational components (Cylinders, Hoses, Connectors, etc.)
- DRB System (flat sides)
NOT INCLUDED
- Buckets
- Forks
| Mod | A | B | C | D | E | F | G | H | I | J | K |
|---|---|---|---|---|---|---|---|---|---|---|---|
| te7 | 2540 | 2410 | 1832 | 1300 | 55º | 78º | 49º | 149 | 1024 Kgs | - | 724 Kgs |
NOTE: The measurements given may vary depending on tractor model / type.
Measurements have been taken for a working pressure of 190 BAR and a weight on the pallet fork.
- I Tear-out force
- J Payload
- K At maximum height
Specifications
DPR System
Rapid loader uncoupling
The ease with which the loader is coupled comes from the DRP System®, a new coupling system that is both safer and quicker.
DR2B System / DR4B System
Rapid nozzle plug (flat faces)
This enables the hydraulic and electric connectors to be instantly connected or disconnected by just raising or lowering the lever, with no oil-loss.
Safety valve
Regulates the pressure in the ram pistons where there is any mechanical contact, preventing possible breakages.
DRC System
Rapid bucket uncoupling
It only takes a few seconds to couple or uncouple any implements.
Self-greasing shaft sleeves
All the joints in the loader have self-greasing sleeves and treated galvanized bolts to achieve a good fit in each of them.
Internal parallelogram system
The internal parallelogram system improves the side view from the tractor cab and implement self-levelling.
Options
AH System ©
Hydraulic Damping
This system provides added convenience by removing all the water hammer produced when driving.
MS System ©
Crossgate cable
Operated using a crossgate, with the possibility of two simultaneous movements.
Third function
Third function for the operation of hydraulic implements.
Paint finish in different colours.
Optionally, the loader can be personalized by painting it with the colour of the tractor.